max 1/2″ × 120″
max 3/8″ × 96″
Durma ADS 37220 CNC
Capacity: 220 metric tons
7-axis system: Y1 – Y2 – X – R – Z1 – Z2 – V
Maximum bending capacity: 145.7″ × 220 T (3700 mm × 220 T)
Distance between columns: 122″ (3100 mm)
Sheet and plate bending capacity
3/8″ over 10 ft
1/2″ over 6 ft (steel)
6″ × 6″ × 3/16″
65 tons
Cutting capacity at 90°, round: up to 120 mm, square: up to 100 mm, rectangular: up to 180 × 100 mm
Left and right angle cutting up to 45°
Capacity at 90°: 18″ × 22″
Cutting capacity at 90°
Solid: 2-3/8″ (60 mm)
Hollow: 4″ (100 mm)
Square: 3-1/4″ × 3-1/4″ (82 × 82 mm)
Cutting capacity at 45°
Solid: 2″ (50 mm)
Hollow: 3-1/2″ (90 mm)
Square: 3″ × 3″ (75 × 75 mm)
Forklift H50 XL – 4,500 lbs
Forklift H80 – 8,000 lbs
Case loader – lifting capacity 22,000 lbs
Dross-free cutting
38 mm (1-1/2")
Production piercing
50 mm (2")
Maximum cutting capacity
80 mm (3.2")
Production piercing
1 ¾’’
Perçage maximum
3’’
Production piercing
1 ¾’’
Maximum rough cut
3.2"
Multiple profiles supported with standard and optional rolls
Minimum bending diameters ranging from 300 mm to 1600 mm depending on profile
Supports flat bars, angles, tubes, rounds, and UPN sections
Pipe capacity up to 1-1/2″ schedule 40
2-1/2" × .188
2-1/2" × .134
2" schedule 40 (1-1/2" stainless)
2" × .125
1-1/4"
1/4"
1/2
15
180°
2-1/2
3" × .200"
120"
up to 190°
360°
1 ½"
tubes/tiges/plat
¾’’ x 18ga / ⅝’’ / ⅜’’ x 1
tiges rondes / carrées / plat
⅝" / ⅝" / ⅜" x 1"
tiges / rondes / carrées / plat
⅝" / ½" x ½" / ⅜" x 1"
tiges carrées / plat
¼" à ⅝" / ⅜" x 1"
tiges carrées
¼" & ⅜"
